PreSonus Eris Pro Sub10 10" Active Subwoofer (Single)
PreSonus Eris Pro Sub10 10" Active Subwoofer (Single)
Elevate your studio experience with the Eris Pro Sub 10, a powerhouse designed for serious personal studios and professional music-production environments. This studio subwoofer empowers you to take control of the low-frequency foundation of your mix, seamlessly complementing your full-range monitors while delivering an extended, musical, and natural low-end response.
At the heart of the Eris Pro Sub 10 lies a 10-inch glass-composite woofer, driven by a potent 250W Class AB power amplifier. This combination ensures fast and accurate transient response, allowing you to hear the full spectrum of your mix, even down to 20 Hz. The lightweight yet rigid cone of the woofer delivers tight, responsive sub-bass that adds depth and precision to your audio.
The Eris Pro Sub 10 comes equipped with essential user controls, including input gain adjustment, a variable lowpass filter that enables you to achieve a seamless crossover transition between your full-range studio monitors and the subwoofer, and a switchable highpass filter that removes content below 80 Hz from the main monitor signal. For convenient referencing, a momentary footswitch is included, allowing you to bypass the subwoofer, highpass filter, and Sub Out with ease. With its powerful and musical performance, the Eris Pro Sub 10 is your key to unlocking the true potential of your mix. It ensures that low-frequency elements are accurately represented, providing a balanced and immersive listening environment.
At Riffs & Licks, we think the Eris Pro Sub 10 offers an exceptional solution for enhancing your studio setup and achieving a more accurate and immersive audio experience.
Features
| 10-inch, front-firing, glass-composite, low-frequency transducer |
| Front-firing, bass-reflex acoustic port |
| Continuously variable lowpass filter (50 Hz to 130 Hz) sets the upper frequency reproduced by the subwoofer |
| Switchable highpass filter removes frequency content below 80 Hz from the full-range subwoofer outputs to the main monitors |
| Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out |
| Input gain control (-30 dB to +6 dB, continuously variable), polarity invert switch, and ground-lift switch |
| 170 watt (RMS), Class AB amplification for up to 113 dB SPL, with a frequency response of 20 to 200 Hz |
| Left and right, balanced XLR and ¼-inch TRS and unbalanced RCA main inputs |
| Left and right balanced XLR and ¼-inch TRS outputs and XLR subwoofer output for connecting a second Eris Pro Sub 10 |
(PRE-ERIS-PROSUB10)
Inputs |
|
|---|---|
| 1- Stereo 1/8" | |
| 2- Balanced ¼” TRS | |
| 2- Unbalanced RCA |
Performance |
|
|---|---|
| Frequency Response | 80 Hz - 20 kHz |
| Crossover Frequency | 2.8 kHz |
| Amplifier Power | 25W/speaker |
| LF Driver | 3.5" Kevlar® |
| HF Driver | 1” silk dome |
| Peak SPL (@ 1 meter) | 100 dB |
| Input Impedance | 10 kΩ |
User Controls |
|
|---|---|
| Volume Range | A-type taper |
| MF Control | Variable (-6 to +6 dB, center 100 Hz) |
| HF Control | Variable (-6 to +6 dB, center 10 kHz) |
Protection |
|
|---|---|
| RF interference | |
| Output-current limiting | |
| Over-temperature | |
| Turn-on/off transient | |
| Subsonic filter | |
| External mains fuse |
Power |
|
|---|---|
| 100-120V ~50/60 Hz or 220-240V ~50/60 Hz |
Cabinet |
|
|---|---|
| Vinyl-laminated, medium-density fiberboard |
Physical |
|
|---|---|
| Width | 5.6" (141 mm) |
| Depth | 6.4" (162 mm) |
| Height | 8.3" (210 mm) |
| Weight (per pair) | 6.4 lb. (2.9 kg) |
| SKU | PRE-ERIS-PROSUB10 |
| Barcode # | 673454011559 |
| Brand | Presonus |
| Shipping weight | 17.0000kg |
| Shipping width | 0.400m |
| Shipping height | 0.320m |
| Shipping length | 0.400m |
| Shipping cubic | 0.051200000m3 |
Help other shoppers by writing reviews for products you have purchased.
